Classifications and specifications
The classification of all types of oil ensures consistent quality and functionality of lubricants internationally. This standardization makes it possible to make specific statements about the requirements for the lubricants.
Specifications, on the other hand, depend on the manufacturer and indicate which engine or gearbox the lubricants are compatible with and officially approved by the vehicle manufacturer.
![](https://liquimoly.cloudimg.io/v7/https://www.liqui-moly.com/fileadmin/_processed_/8/5/csm_20240620_Teaser_Website_FAQ_SpeziFreigaben_59e3d3c057.jpg?force_format=webp%2Coriginal 400w,https://liquimoly.cloudimg.io/v7/https://www.liqui-moly.com/fileadmin/_processed_/8/5/csm_20240620_Teaser_Website_FAQ_SpeziFreigaben_f109ac4f0a.jpg?force_format=webp%2Coriginal 576w,https://liquimoly.cloudimg.io/v7/https://www.liqui-moly.com/fileadmin/_processed_/8/5/csm_20240620_Teaser_Website_FAQ_SpeziFreigaben_d98ed583b7.jpg?force_format=webp%2Coriginal 768w,https://liquimoly.cloudimg.io/v7/https://www.liqui-moly.com/fileadmin/_processed_/8/5/csm_20240620_Teaser_Website_FAQ_SpeziFreigaben_b3fd751027.jpg?force_format=webp%2Coriginal 720w,https://liquimoly.cloudimg.io/v7/https://www.liqui-moly.com/fileadmin/_processed_/8/5/csm_20240620_Teaser_Website_FAQ_SpeziFreigaben_1216e39d6b.jpg?force_format=webp%2Coriginal 925w)
Engine oil classification
In order to select the correct engine oil, two pieces of information are required: viscosity and quality. There are several organizations for this classification of engine oil:
- SAE (Society of Automotive Engineers)
- ACEA (European Automobile Manufacturers Association)
- API (American Petrol Institute)
- ILSAC (International Lubricant Standardization and Approval Committee)
- JASO (Japan Automobile Standards Organization)
The well-known European vehicle and engine manufacturers (Mercedes-Benz, BMW, VW, etc.) use SAE viscosity specifications and ACEA quality specifications.
The engine oils to be used for import vehicles developed outside Europe (Toyota, Mitsubishi, Chrysler, etc.) are also based on SAE for viscosity specifications and mainly on API or ILSAC for quality specifications. For diesel vehicles with DPF increasingly also in accordance with ACEA.
SAE (Society of Automotive Engineers)
The Society of Automotive Engineers classifies oils exclusively according to limit temperatures at which a certain flow behavior (viscosity) must be demonstrated. However, viscosity only provides information about the fluidity (internal friction) of an oil and does not define any qualitative properties. An oil with SAE classification therefore only has a specified flow behavior at different temperatures.
Cold start range viscosity is indicated with the letter “W” (e.g. 5W). The smaller the number before the “W”, the more fluid the oil is at low temperatures. The number without a letter (e.g. 30) indicates the operating temperature range. The higher the number, the thicker the oil when measured at 100 °C.
Up to which low temperature a motor/gearbox oil can be used depends on the flowability in the limit temperature range. The deeper the expected temperature, the less viscous the oil has to be.
This is how long it takes for the engine oil to reach the last lubrication point during a cold start (0 °C):
Viscosity 0W-XX | Viscosity 5W-XX | Viscosity 10W-XX | Viscosity 15W-XX |
2.8 seconds | 8 seconds | 28 seconds | 48 seconds |
SAE 0W | - 40 °C |
SAE 5W | - 35 °C |
SAE 10W | - 30 °C |
SAE 15W | - 25 °C |
SAE 20W | - 20 °C |
SAE 25W | - 15 °C |
(max. 150.000 mPa*s)
SAE 70W | - 55 °C |
SAE 75W | - 40 °C |
SAE 80W | - 26 °C |
SAE 85W | - 12°C |
ACEA (European Automobile Manufacturers Association)
The European Automobile Manufacturers’ Association is the oil standard for European vehicle and engine manufacturers. The ACEA classification distinguishes between oils for gasoline engines (A), passenger car diesel engines (B), passenger car gasoline and diesel engines with exhaust aftertreatment systems (e.g. particulate filters) (C) and commercial vehicle diesel engines (E). Each category has its own meaning and cannot be used in a backwards-compatible manner.
At the end of 2018, the ATIEL (interest group representing the knowledge and experience of engine oil manufacturers and marketers) stipulated in the “Letter of Conformance” that ACEA A / B may not be advertised on an oil in conjunction with ACEA C specifications, as the components (e.g. ash content, etc.) are too different. This meant that all ACEA A/B specifications had to be removed from ACEA C oils.
A1/B2 | Hochleistungsmotoröl für Benzin- und Dieselmotoren, sog. Fuel-Economy-Motoröl mit besonders niedriger High-Temperature-High-Shear-Viskosität (2,9 - 3,5 mPA*s). Reserviert für die Viskositätsklasse xW-20. Ungültig seit 12/2016. |
A3/B4 | Hochleistungsmotoröl für Benzin- und Dieselmotoren, übertrifft und ersetzt konventionelle Motoröle wie ACEA A2/B2 bzw. A3/B3 und kann für verlängerte Wechselintervalle eingesetzt werden. |
A5/B5 | Hochleistungsmotoröl für Benzin- und Dieselmotoren, sog. Fuel-Economy-Motoröle mit besonders niedriger High-Temperature-High-Shear-Viskosität (2,9 - 3,5 mPa*s). Reserviert für die Viskositätsklassen xW-30. |
A7/B7 (NEU) | Hochleistungsmotoröl für Benzin- und Dieselmotoren. Für geringe Viskositätsklassen (0W-x) mit besonders niedriger High-Temperature-High-Shear-Viskosität (2,9-3,5 mPa*s). Baut auf ACEA A5/B5 auf und bietet zusätzlichen Schutz vor LSPI, erhöhte Turbolader-Sauberkeit und verbessertem Ketten-Verschleißschutz. |
C1 | Kategorie für Low-SAPS-Öl mit abgesenkter HTHS-Viskosität ≥ 2,9 mPa*s, Performance wie A5/B5, jedoch mit stark begrenzten Anteilen Sulfatasche, Phosphor, Schwefel. |
C2 | Kategorie für Low-SAPS-Öl mit abgesenkter HTHS-Viskosität ≥ 2,9 mPa*s, Performance wie A5/B5, mit begrenzten, aber höheren Anteilen Sulfatasche, Phosphor, Schwefel verglichen mit C1. |
C3 | Kategorie für Mid-SAPS-Öl mit hoher HTHS-Viskosität ≥ 3,5 mPa*s, Performance wie A3/B4, mit begrenzten, aber höheren Anteilen Sulfatasche, Phosphor, Schwefel verglichen mit C1. |
C4 | Kategorie für Low-SAPS-Öl mit hoher HTHS-Viskosität ≥ 3,5 mPa*s, Performance wie A3/B4, mit gleichen Anteilen Sulfatasche und Schwefel, bei erhöhtem Anteil Phosphor verglichen mit C1. |
C5 | Kategorie für Mid-SAPS-Öl mit stark abgesenkter HTHS-Viskosität 2,6 – 2,9 mPas*s, für nochmals verbesserte und optimale Kraftstoffeinsparung, für Fahrzeuge mit modernsten Abgasnachbehandlungssystemen, nur für Motoren mit entsprechenden technischen Voraussetzungen. |
C6 (NEU) | Baut auf ACEA C5 auf und hat spezifische Tests mit Schwerpunkt auf LSPI und Turboladerschutz, sowie neue Kraftstoffverbrauchtests |
API (American Petrol Institute)
The American Petrol Institute basically distinguishes between two types of engine oil, one for gasoline engines (S) and one for diesel engines (C). The letter following the first letter S or C, e.g. J or L, defines the quality of the lubricant. The later in the alphabet this letter is, the higher the quality of the motor oil. Higher-quality specifications such as API SN Plus or SP can be used without concern according to API for the previous classifications, e.g. API SM, and are therefore backwards compatible.
The latest API SP and API SN Plus also contain LSPI tests. There is also the addition “+RC” for the API SN Plus classification. This represents additional fuel savings.
For engine oils for diesel engines, a “-4” may also be listed. This addition indicates suitability for large-volume 4-stroke diesel engines such as trucks or buses (heavy duty). API CF-2 stands for the quality of a 2-stroke diesel engine oil.
In 2016, API F was introduced as a new stand-alone diesel specification for emission & fuel savings. This new specification may only be used in engines designed specifically for this purpose. API FA-4 is for xW-30 oils with reduced HTHS viscosity and is not compatible with API Cx-4 classes.
API-SA | (bis 1930) mit Stockpunktverbesserer und Antischaummittel |
API-SB | (nach 1930) mit Wirkstoffen gegen Alterung, Korrosion und Verschleiß |
API-SC | (von 1964 bis 1967) zusätzlich Wirkstoffen gegen Verkokung |
API-SD | (von 1968 bis 1971) für schwere Betriebsbedingungen bei Otto-Motoren |
API-SE | (von 1971 bis 1979) mit höheren Anforderungen bei Otto-Motoren |
API-SF | (von 1980 bis 1987) mit verbessertem Verschleißschutz und Schlammtragevermögen |
API-SG | (von 1987 bis 1993) mit zusätzlichem Schutz gegen (Schwarz-) Schlammbildung |
API-SH | (von 1993 bis 1996) mit zusätzlichen Anforderungen gegen den Schmierfilmabriss bei hohen Temperaturen und hoher Scherbelastung (HTHS) und den Verdampfungsverlust |
API-SJ | (ab 1996) mit zusätzlichen Anforderungen hinsichtlich Verdampfungsverlust |
API-SL | (ab 2001) mit zusätzlichen Anforderungen an die Kraftstoffeffizienz („energiesparend“) |
API-SM | (ab 2004) mit zusätzlichen Anforderungen an Oxidationsstabilität, Motorsauberkeit, Verschleißschutz, Alterungsverhalten und Leistungsvermögen bei niedrigen Temperaturen. |
API-SN | (ab 2010) für verbesserten Hochtemperaturschutz an Kolben, strengere Schlammkontrolle, höhere Dichtungskompatibilität. |
SN-RC | Verbesserte Performance für geringeren Kraftstoffverbrauch, Turboladerschutz, kompatibel zu Abgasreinigungsanlagen, und Schutz der Motoren, die mit Ethanol-haltigen Kraftstoffen bis zu E85 betrieben werden |
API-SN | Plus (ab 2018) Ergänzung zu API-SN mit zusätzlichen Anforderungen und LSPI Test, um vor Frühzündung bei niedriger Drehzahl (LSPI) bei turbo aufgeladenen Benzin-Direkteinspritzmotoren zu schützen. |
API-SP | (ab 2020) mit zusätzlichen Anforderungen an, die Verringerung von LSPI während des gesamten Ölwechselintervalls, den Verschleißschutz für Motor und Kette, Schutz vor Korrosion, Kompatibilität mit Emissionssystemen (OPF/GPF), Oxidationsstabilität, Kontrolle von Ablagerungen, Schutz vor Schlamm und Verlackung |
API-TA | Mopeds (obsolet) |
API-TB | Motorräder und Motorroller (obsolet) |
API-TC | Hochleistungsmotoren (obsolet, jedoch noch weltweit anerkannt) |
Info: NMMA TC-W3 -> 2-Takt Spezifikation für Boote
ILSAC (International Lubricant Standardization and Approval Committee)
The International Lubricants Standardization and Approval Committee is very strongly based on the categories according to API in its classification of motor oil. There are six classification classes (GF-1 to GF-6) for gasoline engines. ILSAC does not take diesel engines into account.
GF-1 | Einführungsjahr 1996, vergleichbar mit API SH, Kategorie nicht aktuell |
GF-2 | Einführungsjahr 1997, vergleichbar mit API SJ |
GF-3 | Einführungsjahr 2001, vergleichbar mit API SL |
GF-4 | Einführungsjahr 2004, vergleichbar mit API SM |
GF-5 | Einführungsjahr 2010, vergleichbar mit API SN |
GF-6 | Einführungsjahr 2020, vergleichbar mit API SP |
GF-6A (NEU) | Einführungsjahr 2020, vergleichbar mit API SP
|
GF-6B (NEU) | Einführungsjahr 2020, vergleichbar mit API SP
|
JASO (Japan Automobile Standards Organization)
The Japan Automobile Standard Organization predominantly defines the criteria and quality standards for two-wheel oils. Here increased requirements of friction behavior (wet clutches), shear stability and burning behavior are set out. The JASO and API classifications are always occur together in the two-wheel sector. There are also specifications for passenger cars and commercial vehicles.
JASO MA | hoher Reibwert für Motorräder mit Nasskupplung |
JASO MA-2 | sehr hoher Reibwert für Motorräder mit Nasskupplung |
JASO MB | geringer Reibwert für Zweiräder ohne Nasskupplung |
JASO FB | geringe Reinigung, unvollständige Verbrennung |
JASO FC | hohe Reinigung, nahezu vollständige Verbrennung |
JASO FD | höchste Reinigung, vollständige Verbrennung |
DH-1 | Japanische Dieselmotorenöl-Leistungsklassifikation, Einführungsjahr 2020 |
DH-2 | Leistunsgklassifizierung wie DH-1, jedoch für Abgasnachbehandlungssysteme, max. 50 ppm Diesel-Schwefelgehalt |
DL-1 | Leistungsklassifizierung wie DH-1, jedoch speziell für PKW mit Abgasnachbehandlungssystemen, max. 50 ppm Diesel-Schwefelgehalt |
Gear oil classification
With the increasing number of gearbox types, gear oils have also been further developed and adapted. These are roughly divided into manual or axle drive gearbox, automatic, dual-clutch and CVT gearbox. Within these main groups, there are various subgroups, all of which require a special lubricant tailored to the design and intended use.
For gearbox oils, however, there is no uniform basis that the manufacturers are obliged to uphold (e.g. ACEA). This leads to a variety of special manufacturer approvals.
In order to at least be able to get a general answer as to what quality or which properties a gearbox oil corresponds to, division into by API for manual gearbox and axle drives and by DEXTRON for automatic gearboxes has become established. The viscosity of the manual gearbox and axle drive is – as with motor oil – classified by SAE. The viscosity of automatic gearbox oils, so-called ATF oils (Automatic Transmission Fluid), is not classified by SAE, as the viscosity is a part of the respective manufacturer approval.
The following must therefore be observed in order to select the correct gear oil: High-performance lubricants that comply with manufacturer approvals are required for the trouble-free operation of modern gearboxes. The type and quantity of additives in the lubricant has a significant influence on various parameters, such as the shifting capacity, the change interval, the friction behavior and the wear protection.
GL 1 | gering belastete Kegelrad- oder Schneckengetriebe |
GL 2 | Schneckengetriebe (nicht in Straßenfahrzeugen) |
GL 3 | Schaltgetriebe (Oldtimer) |
GL 4 | Schaltgetriebe, Hypoidgetriebe wenn zugelassen |
GL 5 | Hypoidgetriebe, Schaltgetriebe wenn zugelassen |
DEXTRON Tasa | ab 1957 |
DEXTRON B | ab 1967 |
DEXTRON II C | ab 1973 |
DEXTRON II D | ab 1981 |
DEXTRON II E | ab 1991 |
DEXTRON III F | ab 1994 |
DEXTRON III G | ab 1997 |
DEXTRON III H | ab 2003 |
DEXTRON VI | ab 2005 |
Mercon | ab 1987 |
Mervon V | ab 1996 |
Mercon LV | ab 2005 |
Mercon ULV | ab 2014 |
Mercedes-Benz | 26 ATF-Freigaben (MB-Freigabe 236.x) 21 (Hypoid-)Getriebeöl-Freigaben (MB-Freigabe 235.x) |
Volkswagen | 14 ATF-Freigaben (G 052 xxx, G055 xxx, G060 xxx) 15 (Hypoid-)Getriebeöl-Freigaben (G 052 xxx, G055 xxx, G060 xxx) |
![](https://liquimoly.cloudimg.io/v7/https://www.liqui-moly.com/fileadmin/_processed_/b/3/csm_20240604_Spezifikationen_PKW_de_2308c5ce76.jpg?force_format=webp%2Coriginal 400w,https://liquimoly.cloudimg.io/v7/https://www.liqui-moly.com/fileadmin/_processed_/b/3/csm_20240604_Spezifikationen_PKW_de_0b2322f382.jpg?force_format=webp%2Coriginal 576w,https://liquimoly.cloudimg.io/v7/https://www.liqui-moly.com/fileadmin/_processed_/b/3/csm_20240604_Spezifikationen_PKW_de_5cff8a752d.jpg?force_format=webp%2Coriginal 768w,https://liquimoly.cloudimg.io/v7/https://www.liqui-moly.com/fileadmin/_processed_/b/3/csm_20240604_Spezifikationen_PKW_de_6d942cc4e1.jpg?force_format=webp%2Coriginal 720w,https://liquimoly.cloudimg.io/v7/https://www.liqui-moly.com/fileadmin/_processed_/b/3/csm_20240604_Spezifikationen_PKW_de_1c174d49c0.jpg?force_format=webp%2Coriginal 925w)
Car manufacturer specifications
European vehicle manufacturers base their prescribed manufacturer specifications on the ACEA engine tests. In order to achieve a manufacturer approval for a certain oil, in addition to the respective ACEA test procedure, further motor tests and requirements must be fulfilled.
Basic classification of passenger car manufacturer specifications
Longlife-98 | Basis ACEA A3/B3, verwendbar ab Modelljahr ′98, wird ersetzt durch Longlife-01 |
Longlife-01 | Basis ACEA C3, verwendbar ab Modelljahr ′01, für Benzin- und Dieselmotoren ohne DPF |
Longlife-04 | Basis ACEA C3, verwendbar ab Modelljahr ′04 |
Longlife-12 FE | Basis ACEA C2, verwendbar ab Modelljahr ′13, abgesenkte HTHS-Viskosität, nicht rückwärtskompatibel, nur für ausgewählte Motoren |
Longlife-14 FE+ | Basis ACEA A1/B1, verwendbar ab Modelljahr ′14, abgesenkte HTHS-Viskosität, nicht rückwärtskompatibel |
Longlife-17 FE+ | Basics ACEA C5, verwendbar ab Modelljahr '14, abgesenkte HTHS-Viskosität, schließt Longlife -14 FE+ mit ein, nur für ausgewählte Ottomotoren |
Longlife-19 FE | Diesel-Ölspezifikation auf Basis ACEA C3, die mit neuem BMW Prüfmotor durchgeführt wurde und aktuell für viele Motoren ab 2004 mit Longlife-04 Freigabe technisch geeignet ist. Viskositätsklasse 0W-30 |
Longlife-22FE++ | Benzin-Ölspezifikation, die mit neuem BMW Prüfmotor durchgeführt wurde und nur für zugelassene Otto-Motoren ab MJ 2022 verwendet werden darf. |
9.55535-CR1 | Basis ILSAC GF-5 bzw. API SN, Viskositätsklasse 5W-20 |
9.55535-DS1 | Basis ACEA C2, Viskositätsklasse 0W-30 |
9.55535-DM1 | Basis ACEA C5, vollsynthetisch, spezielle Entwicklung |
9.55535-G1 | Basis ACEA A1 bzw. A5, Viskositätsklasse 5W-30, spezielle Entwicklung für CNG-Motoren |
9.55535-G2 | Basis ACEA A3, Viskositätsklassen 10W-40 und 15W-40, verwendbar in älteren Ottomotoren |
9.55535-GH2 | Basis ACEA C3, Viskositätsklasse 5W-40, spezielle Entwicklung für ″1750 Turbo Motor″ |
9.55535-GS1 | Basis ACEA C2, Viskositätsklasse 0W-30, spezielle Entwicklung für 0.9 Twin Air (Turbo) Motor |
9.55535-GSX | Basis ILSAC GF-5 bzw. API SN, Viskositätsklasse 0W-20 |
9.55535-H2 | Basis ACEA A3, Viskositätsklasse 5W-40, geeignet für verlängerte Wechselintervalle |
9.55535-M2 | Basis ACEA A3/B4, Viskositätsklassen 0W/5W-40, geeignet für verlängerte Wechselintervalle |
9.55535-N2 | Basis ACEA A3/B4, Viskositätsklasse 5W-40, geeignet für Otto- und Dieselturbomotoren |
9.55535-S1 | Basis ACEA C2, Viskositätsklasse 5W-30, geeignet für Otto- und Dieselturbomotoren mit WIV |
9.55535-S2 | Basis ACEA C3, Viskositätsklasse 5W-40, geeignet für Otto- und Dieselmotoren mit WIV |
9.55535-S3 | Basis ACEA C3, Viskositätsklasse 5W-30, spezielle Entwicklung für Chrysler, Jeep und Lancia |
9.55535-S4 | Basis ACEA C4, Viskositätsklasse 5W-30 |
9.55535-T2 | Basis ACEA C3, Viskositätsklasse 5W-40, spezielle Entwicklung für Gasmotoren |
9.55535-Z2 | Basis A3/B4, Viskositätsklasse 5W-40, spezielle Entwicklung für Twin-Turbodieselmotoren |
Abarth 0101 | Kein ACEA Performance Level, Viskositätsklasse 10W-50, spezielle Freigabe für Abarth-Motoren |
WSS-M2C-913-D | Basis ACEA A5/B5, ersetzt WSS-M2C-913-A, B und C |
WSS-M2C-925-B | Basis API SM, rückwärtskompatibel mit WSS-M2C-925-B, wird ersetzt durch WSS-M2C-948-B |
WSS-M2C-917-A | Basis ACEA A3/B4, Gegenstück zu VW 505 01 |
WSS-M2C-934-B | Basis ACEA C1, Viskositätsklasse 5W-30 |
WSS-M2C-925-A | Basis ACEA A1/B1, A5/B5 und ILSAC GF-3, Viskositätsklasse 5W-20 |
WSS-M2C-925-B | Basis ACEA A5/B5, Viskositätsklasse 5W-20, stark abgesenkte HTHS-Viskosität |
WSS-M2C-930-A | Basis ILSAC GF-4, Viskositätsklasse 5W-20, stark abgesenkte HTHS-Viskosität |
WSS-M2C-937-A | Basis ACEA A3/B4, Viskositätsklasse 0W-40, speziell für Focus RS |
WSS-M2C-945-A & B1 | Basis ILSAC GF-5, Viskositätsklasse 5W-20, stark abgesenkte HTHS-Viskosität |
WSS-M2C-946-A & B1 | Basis ILSAC GF-5, Viskositätsklasse 5W-30 |
WSS-M2C-947-A & B1 | Basis ILSAC GF-5 und API SN, Viskositätsklasse 0W-20, stark abgesenkte HTHS-Viskosität |
WSS-M2C-948-B | Basis API SN, speziell entwickelt für Ford EcoBoost-Motoren |
WSS-M2C-950-A | Basis ACEA C2, speziell entwickelt für Euro 6 TDCi-Motoren, Viskositätsklasse 0W-30 |
WSS-M2C-952-A1 | Basis ACEA C5, Viskositätsklasse 0W-20, Sulfataschegehalt <0,8%, speziell entwickelt für 1,5 EcoBlue Dieselmotor (ab 2018) |
WSS-M2C-956-A1 | Basis ACEA C5, Viskositätsklasse 0W-20, ähnlich VW 508 00 / 509 00, für Tourneo Connect (ab 2021) |
MB-Freigabe 229.1 | Für alle Pkw bis 03/2002, wird ersetzt durch MB 229.3 |
MB-Freigabe 229.3 | Für Intervalle bis 30.000 km, wird ersetzt durch MB 229.5 |
MB-Freigabe 229.5 | Schärfere Anforderungen als bei der 229.3, Intervalle bis 40.000 km möglich |
MB-Freigabe 229.31 | Anforderungen wie bei 229.3 jedoch aschearm, wird ersetzt durch MB 229.51 |
MB-Freigabe 229.51 | Anforderungen wie bei 229.5 jedoch aschearm, wird ersetzt durch MB 229.52 |
MB-Freigabe 229.52 | Erhöhte Anforderungen an die Oxidationsstabilität und Kraftstoffersparnis |
MB-Freigabe 229.6 | Basis ACEA A5/B5, nicht rückwärtskompatibel, Kraftstoffersparnis, nur für ausgewählte Motoren |
MB-Freigabe 229.61 | Basis ACEA C2 |
MB-Freigabe 229.71 | Basis ACEA C5, stark abgesenkte HTHS-Viskosität, nicht rückwärtskompatibel, nur für ausgewählte Motoren |
MB-Freigabe 226.5 | Basierend auf Renault RN0700 |
MB-Freigabe 226.51 | Basierend auf Renault RN0720 |
INFO: 2 Ziffern nach dem Punkt = aschereduziert für Abgas-Nachbehandlungssysteme
GM LL-A-025 | Basis ACEA A3/B3, Spezifikation für Benzinmotoren, obsolet, ersetzt durch GM Dexos2 |
GM LL-B-025 | Basis ACEA A3/B4, Spezifikation für Dieselmotoren, obsolet, ersetzt durch GM Dexos2 |
GM Dexos 2 | Basis ACEA C3, verwendbar für alle Motoren ab Modelljahr ′10, wird zum Teil durch die OV0401547 ersetzt. |
GM Dexos1 Gen. 2 | Basis API SN-RC, Viskositätsklassen 0W-20, 5W-20 und 5W-30 Spezifikation für Benzin-Ottomotoren mit Direkteinspritzung und LSPI-Problemen. |
GM Dexos1 Gen. 3 | Erweiterung der GM Dexos1 Gen.2 und ist rückwärts- kompatibel zu dieser (seit Opel-Übernahme durch PSA, nur noch für GM General Motors gültig). |
OV 040 1547 - A20 | Basis ACEA C5, Viskositätsklasse 0W-20 für Benzin und Dieselmotoren HTHS >= 2,6 und LSPI Schutz, neue Opel/ Vauxhal Spezifikation bzw. Bezeichnung für GM dexos2 Gen.2 und GM dexos D. |
OV 040 1547 - D30 | Basis ACEA C3, Viskositätsklasse 5W-30 neue Opel/Vauxhal Spezifikation bzw. Bezeichnung für GM Dexos2 für Dieselmotoren |
OV 040 1547 - G30 | Basis ACEA C3, Viskositätsklasse 5W-30 neue Opel/Vauxhal Spezifikation bzw. Bezeichnung für GM Dexos1 Gen.2 und GM Dexos2 für Benzinmotoren |
PSA B71 2290 | Basis ACEA C2 mit der Viskositätsklasse 5W-30 |
PSA B71 2295 | Basis ACEA A2/B2 für Motoren vor Modelljahr 1998, keine Viskosität definiert |
PSA B71 2296 | Basis ACEA A3/B4 mit den Viskositätsklassen 0W-30, 0W-40, 5W-30 und 5W-40 |
PSA B73 2297 | Basis ACEA C3 mit den Viskositätsklassen xW-30 und xW-40 |
PSA B71 2300 | Basis ACEA A3/B4 mit den Viskositätsklassen xW-40 und xW-50 |
PSA B71 2312 | Basis ACEA C2 mit der Viskositätsklasse 0W-30 |
A 40 | Basis ACEA A3 mit den Viskositätsklassen 0W-40 und 5W-40, für Benzinmotoren ab '94. |
C 20 | Basis ACEA C5, entspricht VW 508 00/509 00, nicht rückwärtskompatibel, nur für ausgewählte Motoren. |
C 30 | Basis ACEA C3, entspricht VW 504.00/507.00. |
C 40 | Basis ACEA C3, entspricht VW 511 00, für Benzin-Ottomotoren mit Partikelfilter (ab MJ 2019), nicht rückwärtskompatibel. |
RN 0700 | Basis ACEA A3/B4, zulässig für alle Renault-Benzinmotoren. |
RN 0710 | Basis ACEA A3/B4, zulässig für alle Renault-Dieselmotoren ohne Rußpartikelfilter. |
RN 0720 | Basis ACEA C4, zulässig für alle Renault-Dieselmotoren mit Rußpartikelfilter ab Modelljahr ´10. |
RN 17 | Basis ACEA C3, zulässig für alle Dieselmotoren ab Modelljahr 2018, ersetzt RN 0700 und RN 0710. |
RN 17 FE | Basis ACEA C5, wie RN 17 + Kraftstoffeinsparung. |
VW 500 00 | Mehrbereichsöl mit den Viskositätsklassen SAE 5W-X/10W-X, wird ersetzt durch VW 501 01 |
VW 501 01 | Mehrbereichsöl mit den Viskositätsklassen SAE 5W-X/10W-X, wird ersetzt durch VW 502 00 |
VW 502 00 | Mehrbereichsöl für höhere Anforderungen |
VW 503 00 | Longlife-Spezifikation für Benzinmotoren, Basis ACEA A1, Viskositätsklassen 0W-30/5W-30 |
VW 503 01 | Longlife-Spezifikation für aufgeladene Benzinmotoren, Viskositätsklasse 5W-30 |
VW 505 00 | Mehrbereichsöl für Saug- und Turbodieselmotoren |
VW 505 01 | Mehrbereichsöl für Pumpe-Düse-Motoren, Basis ACEA B4, Viskositätsklasse 5W-40 |
VW 506 00 | Longlife-Spezifikation für aufgeladene Dieselmotoren, Viskositätsklasse 0W-30 |
VW 506 01 | Longlife-Spezifikation für Pumpe-Düse-Motoren |
INFO: Alle VW-Freigaben von 500 000 bis 506 01 werden durch VW 504 00 und VW 507 00 ersetzt (ausgenommen R5 und V10 TDI-Motoren vor 06/2006) | |
VW 504 00 | Longlife III - Spezifikation für Benzinmotoren mit und ohne Longlife-Service |
VW 507 00 | Longlife III - Spezifikation für Dieselmotoren mit und ohne Longlife-Service |
VW 508 00 | Longlife IV - Spezifikation für Benzinmotoren mit und ohne Longlife-Service, nicht rückwärtskompatibel, Viskositätsklasse SAE 0W-20 |
VW 509 00 | Longlife IV - Spezifikation für Dieselmotoren mit und ohne Longlife-Service, nicht rückwärtskompatibel, Viskositätsklasse 0W-20 |
VW 511 00 | Spezifikation für Hochleistungs-Benzin-Ottomotoren mit Partikelfilter, nur für ausgewählte Motoren |
![](https://liquimoly.cloudimg.io/v7/https://www.liqui-moly.com/fileadmin/_processed_/b/4/csm_20240718DE_Klassifizierungen_NFZ_SAPS_c121aacb30.jpg?force_format=webp%2Coriginal 400w,https://liquimoly.cloudimg.io/v7/https://www.liqui-moly.com/fileadmin/_processed_/b/4/csm_20240718DE_Klassifizierungen_NFZ_SAPS_34bb8fb74d.jpg?force_format=webp%2Coriginal 576w,https://liquimoly.cloudimg.io/v7/https://www.liqui-moly.com/fileadmin/_processed_/b/4/csm_20240718DE_Klassifizierungen_NFZ_SAPS_b82bdbd03f.jpg?force_format=webp%2Coriginal 768w,https://liquimoly.cloudimg.io/v7/https://www.liqui-moly.com/fileadmin/_processed_/b/4/csm_20240718DE_Klassifizierungen_NFZ_SAPS_06edcb402f.jpg?force_format=webp%2Coriginal 720w,https://liquimoly.cloudimg.io/v7/https://www.liqui-moly.com/fileadmin/_processed_/b/4/csm_20240718DE_Klassifizierungen_NFZ_SAPS_7a0740f858.jpg?force_format=webp%2Coriginal 925w)
Commercial vehicle manufacturer specifications
European vehicle manufacturers base their prescribed manufacturer specifications on the ACEA or API engine tests. In order to achieve a manufacturer approval for a certain oil, in addition to the respective ACEA/API test procedure, further motor tests and requirements must be fulfilled.
Basic classification of commercial vehicle manufacturer specifications
18-1804 FE | Basis ACEA E4/E5 mit TBN-Gehalt >14 |
18-1804 TLS E6 | Basis ACEA E6 mit TBN-Gehalt >13 |
18-1804 T2 E7 | Basis ACEA E7 mit TBN-Gehalt >14 |
18-1804 TLS E9 | Basis ACEA E9 oder API CJ-4 |
18-1804 TFE | Basis ACEA E4/E7 mit TBN-Gehalt >16 |
18-1804 TLV LS | Spezielle Entwicklung für IVECO Stralis Euro 6 Motoren, die mit Kraftstoffsparpaket FEP1 ausgestattet sind, Viskositätsklasse 0W-20 |
18-1809 NG2 | Basis ACEA E6 mit TBN-Gehalt >12 Viskositätsklasse 5W-30 und 10W-40 für CNG Motoren |
18-1811 SC1 | Basis ACEA C2, mit TBN >7, Viskositätsklasse 5W-30, für Transporter ab BJ 2009 |
18-1811 SC1 LV | Basis ACEA C2, mit TBN >7, Viskositätsklasse 0W-30, für Transporter BJ 2014-2021 |
Volvo VDS | Basis API CD/CE, Wartungsintervalle bis 50.000 km möglich |
Volvo VDS-2 | Basis ACEA E7, Wartungsintervalle bis 60.000 km möglich |
Volvo VDS-3 | Basis ACEA E5, Wartungsintervalle bis 100.000 km möglich |
Volvo VDS-4 | Basis API CJ-4, Nahverkehr, aschearm |
Volvo VDS-4.5 | Basis API CK-4, Langstrecke, rückwärtskompatibel |
Volvo VDS-5 | Basis API FA-4, abgesenkte HTHS-Viskosität, nicht rückwärtskompatibel, nur für ausgewählte Motoren |
Scania LDF | Basis ACEA E5 |
Scania LDF-2 | Basis ACEA E7 ab Euro 4 verwendbar |
Scania LDF-3 | Basis ACEA E7 ab Euro 5 verwendbar, verlängerter Wechselintervall |
Scania LDF-4 | Basis ACEA E6 ab Euro 6 verwendbar, verlängerter Wechselintervall, Kraftstoffeinsparung, nur für ausgewählte Motoren |
Scania Low Ash | Basis ACEA E6/E9 (aschearm) |
M3275 | SHPD-Motoröl, Wechselintervall bis 60.000 km möglich |
M3277 | UHPD-Motoröl, Wechselintervall bis 80.000 km möglich |
M3377 | Höhere Anforderungen an Sauberkeit/Ablagerungen zu M3277, Wechselintervall lt. Anzeige |
M3477 | Gleich wie M3277 jedoch aschearm für Euro 5-Motoren mit DPF |
M3677 | Euro 6-Motoren mit DPF, Wechselintervalle bis 120.000 km möglich |
M3977 | Für Euro 6 New Generation-Motoren mit Kraftstoffeinsparung, Viskositätsklasse 5W-20, nicht rückwärtskompatibel |
INFO: Durch die Trennung der Daimler Truck AG (DTAG) und der Mercedes-Benz Group AG (MBAG) ist die DTAG gezwungen, die Flüssigkeitsspezifikationen zu ändern. Daher führt die DTAG die DTFR (Daimler Truck Fluid Release)-Spezifikationen ein.
Zukünftig erkennt man Motorölspezifikationen an der Ziffer 15 z.B. DTFR15C110 für Blatt 228.51 oder DTFR15B110 für Blatt 228.3.
MB-Freigabe 228.1 | Basis ACEA E2 + weitere Motorentests |
MB-Freigabe 228.3 | Basis ACEA E7 + weitere Motorentests |
MB-Freigabe 228.5 | Basis ACEA E4 + weitere Motorentests, verlängerter Wechselintervall |
MB-Freigabe 228.31 | Basis ACEA E9 + weitere Motorentests, DPF geeignet |
MB-Freigabe 228.51 | Basis ACEA E6 + weitere Motorentests, DPF geeignet, verlängerter Wechselintervall |
MB-Freigabe 228.61 | Basis API FA-4 + weitere Motorentests |
INFO: 2 Ziffern nach dem Punkt = aschereduziert für Abgas-Nachbehandlungssyste
RD(RD-2 | Basis ACEA E3 + Volvo VDS-2 |
RLD/RLD-2 | Basis ACEA E9 + Volvo VDS-3 |
RLD-3 | Basis ACEA E9 + Volvo VDS-4 |
RLD-5 | Basis API FA-4 + Volvo VDS-5 für Euro 6d Motoren, nicht rückwärtskompatibel |
RXD | Basis ACEA E7 + Volvo VDS-3 |
RGD (Gas) | Basis ACEA E6 + Volvo VDS-3 + TBN > 8 |
Motorcycle manufacturer specifications
Motorcycle manufacturers largely dispense with their own oil specifications. They rely on the engine tests defined by API or JASO to determine the oil quality. In addition to determining the oil quality, for motorbikes that are equipped with clutches running in oil baths (wet clutch), higher requirements of shear stability, burning behavior and friction behavior have to be fulfilled.
Whether an oil fulfills these properties can be found out via the JASO specification (see JASO engine oil classification), which has to be listed under the approvals.
There is a European ISO standard for 2-stroke engine oils, which is comparable to the JASO 2-stroke classification.
ISO-L-EGB | wie JASO FB |
ISO-L-EGC | wie JASO FC |
ISO-L-EGD | wie JASO FD |