Zinc Spray
Top-grade primer with a zinc purity of 99 % with dried film. For subsequent painting work. Highly resistant and flexible and protects metal parts by means of electrochemical processes. Active corrosion protection, temperature resistant up to approx. 500 °C.
Learn More- lasting corrosion protection
- electrically conductive
- outstanding thermal stability
- high zinc content
- spot-weldable
- fast-drying
- can be painted over
- smooth, pore-free film
-
Danger
- H222 Extremely flammable aerosol.
- H229 Pressurised container: May burst if heated.
- H315 Causes skin irritation.
- H319 Causes serious eye irritation.
- H335 May cause respiratory irritation.
- H336 May cause drowsiness or dizziness.
- H373 May cause damage to organs through prolonged or repeated exposure.
- H411 Toxic to aquatic life with long lasting effects.
This product is regulated by Regulation (EU) 2019/1148: all suspicious transactions, and significant disappearances and thefts should be reported to the relevant national contact point. Please see here.
-
Danger
- H222 Extremely flammable aerosol.
- H229 Pressurised container: May burst if heated.
- H315 Causes skin irritation.
- H319 Causes serious eye irritation.
- H335 May cause respiratory irritation.
- H336 May cause drowsiness or dizziness.
- H373 May cause damage to organs through prolonged or repeated exposure.
- H411 Toxic to aquatic life with long lasting effects.
This product is regulated by Regulation (EU) 2019/1148: all suspicious transactions, and significant disappearances and thefts should be reported to the relevant national contact point. Please see here.
Top-grade primer with a zinc purity of 99 % with dried film. For subsequent painting work. Highly resistant and flexible and protects metal parts by means of electrochemical processes. Active corrosion protection, temperature resistant up to approx. 500 °C.
Application
Shake can for approx. 2 minutes before use. Spray in thin coats on clean, degreased and dry metal surfaces from a distance of approx. 20 – 30 cm. Layer thickness of the zinc film dry after a single spraying: 25 – 35 µm. Note: Can be painted over, but the large number of paint systems available makes a preliminary self-test essential. After use, hold the can with spray head upside down and spray clear the valve until only pure propellant emerges.Product Information
Product Information
Safety data sheets
Safety data sheets
Images and documents
Product Information
Product Information
Safety data sheets
Safety data sheets
Images and documents
