Liquifast 1402
SKU:
6136
310 ml
1C PUR Window Repair Kit, standard modulus, conductive. Proven OEM quality. Fast bonding properties. Cold working. TÜV tested. Drive-away time: with airbag 1.5 h, double airbag 3 h.
Learn More
- single-component
- proven OEM quality
- high viscosity
- cold working
- fast bonding properties
- TÜV tested
- cured by moisture in the air
-
Danger
- H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
- EUH204 Contains isocyanates. May produce an allergic reaction.
-
Danger
- H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
- EUH204 Contains isocyanates. May produce an allergic reaction.
1C PUR Window Repair Kit, standard modulus, conductive. Proven OEM quality. Fast bonding properties. Cold working. TÜV tested. Drive-away time: with airbag 1.5 h, double airbag 3 h.
For bonding front, rear and side windows on vehicles. Cannot be used if the manufacturer requires a high modulus and/or non-conductive windshield adhesive, e.g. with antennas and heaters integrated into the glass.
Application
1. CleanerThe surfaces to be bonded must be dry, free from oil, dust, grease and other dirt residues. The glass surface or the ceramic coating is cleaned with Liquiclean or Cleaner and Thinner, part no. 6130, and finally with Window Cleaner Foam, part no. 1512, as are the bodywork flange or newly painted car-body components. We recommend also cleaning the remaining adhesive beading that has been trimmed back with Liquiclean or Cleaner and Thinner. Before applying the sealant or bonding the window, the cleaned bonding surface must be completely dry.
2. Priming/activation of pre-coated windows
Active Primer is required for adhesive pre-treating during window bonding. The Active Primer is included in the scope of delivery of the Window Repair Kit as a 10 ml stick. Shake Active Primer well for at least 45 seconds before use. Active Primer can be applied universally in the bonding area thinly and evenly (approx. 0.05 mm wet-film thickness) on the cleaned glass surface or ceramic screen printing, on the clean paint surface of newly painted car-body components, on remaining adhesive beadings that have been trimmed back and pre-coated windows (PUR and RIM coatings). The primed surface must be allowed to air off for about 15 minutes before applying the Windshield Adhesive.
If the remaining adhesive beading was trimmed back more than 6 hours ago, pre-treatment with Active Primer is mandatory.
Other information
Recommendations for use are provided in the brochure supplied.SKU
Informations
Container type
Container contents
Language line
PU
Pallet unit
Container type:
Cartridge aluminum
Container contents:
310 ml
Language line:
D-GB-P-I
PU:
12
Pallet unit:
1152
Container type:
Bag aluminum
Container contents:
400 ml
Language line:
D-GB-F-I-E-NL-P
PU:
12
Pallet unit:
756
