Underseal Bitumen, black (Spray)
SKU:
P001441
Corrosion inhibitor that forms a viscoplastic, closed protective film when dried. The coating material containing bitumen has a good anti-drum effect and high abrasion resistance. High solids content. Cannot be painted over.
Learn More
- good corrosion protection
- outstanding rigidity
- high abrasion resistance
- protects against aggressive environmental influences
- covers paint mist
- stone guard
-
Danger
- H222 Extremely flammable aerosol.
- H229 Pressurised container: May burst if heated.
- H315 Causes skin irritation.
- H319 Causes serious eye irritation.
- H336 May cause drowsiness or dizziness.
- H411 Toxic to aquatic life with long lasting effects.
- EUH066 Repeated exposure may cause skin dryness or cracking.
-
Danger
- H222 Extremely flammable aerosol.
- H229 Pressurised container: May burst if heated.
- H315 Causes skin irritation.
- H319 Causes serious eye irritation.
- H336 May cause drowsiness or dizziness.
- H411 Toxic to aquatic life with long lasting effects.
- EUH066 Repeated exposure may cause skin dryness or cracking.
Corrosion inhibitor that forms a viscoplastic, closed protective film when dried. The coating material containing bitumen has a good anti-drum effect and high abrasion resistance. High solids content. Cannot be painted over.
For covering paint mist in the wheel arch and for touching up or supplementing existing coatings on underbodies.
Application
Surfaces which are to be treated must be thoroughly cleaned beforehand. Rust must be removed. The surfaces must be dry and free of wax, dirt and grease and extensively free of dust.The material is best suited for use at room temperature. Shake can vigorously. When the ball has worked loose, continue to shake the can for a further minute. Hold the can vertically when spraying and spray thinly at a distance of about 20–30 cm from the surface. The resistance to abrasion and corrosion increases with increasing coating thickness. For this reason, the spraying process should be repeated once or twice after a short flash-off period. Underseal spray should be sprayed using a cross pattern to avoid spray shadowing.
Other information
After use, the can must be inverted and sprayed until the valve is clear of the product with only propellant escaping.Attention
Do not spray material onto moving parts and hot components such as mechanical joints, the engine, transmission, cardan shaft, exhaust pipe, catalytic converter and brake systems. Cannot be painted over!
SKU
Informations
Container type
Container contents
Language line
PU
Pallet unit
Container type:
Can aerosol
Container contents:
500 ml
Language line:
GB-DK-FIN-N-S
PU:
12
Pallet unit:
840
Container type:
Can aerosol
Container contents:
500 ml
Language line:
D-GB-I-NL-P
PU:
12
Pallet unit:
840
Product Information
Safety data sheets
Images and documents
Product Information
Safety data sheets
Images and documents
