Screw-Retainer Medium Strength
- resistant to stresses and vibrations
- can be used on oily surfaces
- adheres well to vertical surfaces
- prevents leaks
- curing without oxygen (anaerobic)
- good chemical resistance to petrol, oil, water/glycol, brake fluid
- EUH208 Contains Diisopropylbenzene hydroperoxide. May produce an allergic reaction.
- EUH210 Safety data sheet available on request.
- EUH208 Contains Diisopropylbenzene hydroperoxide. May produce an allergic reaction.
- EUH210 Safety data sheet available on request.
- EUH208 Contains Diisopropylbenzene hydroperoxide. May produce an allergic reaction.
- EUH210 Safety data sheet available on request.
Application
Apply uniformly to bolts and nuts. The paste cures in the absence of air (anaerobic).
One must differentiate between active and passive materials during the curing time. Active materials generally refer to metals with a high iron or copper content (e.g. iron, steel, copper, brass, bronze). Active materials ensure rapid curing. Passive materials such as high-alloy (stainless) steel, zinc, aluminum or plastics only cure very slowly.
Other information
Due to the anaerobic properties, there must always be enough air in the bottle. Otherwise the adhesive could harden prematurely. The bottle should therefore only be filled up to about 1/3. However, the quantity always corresponds to the content indicated on the container.
Product Information
Product Information
Safety data sheets
Safety data sheets
Images and documents
Product Information
Product Information
Safety data sheets
Safety data sheets
Images and documents
Product Information
Product Information
Safety data sheets
Safety data sheets
Images and documents
Product Information
Product Information
Safety data sheets
Safety data sheets
Images and documents
