Motorbike Tire Inflator and Sealer
- permanently and reliably seals hairline cracks and small leaks
-
Danger
- H222 Extremely flammable aerosol.
- H229 Pressurised container: May burst if heated.
- H319 Causes serious eye irritation.
- H336 May cause drowsiness or dizziness.
- EUH066 Repeated exposure may cause skin dryness or cracking.
-
Danger
- H222 Extremely flammable aerosol.
- H229 Pressurised container: May burst if heated.
- H319 Causes serious eye irritation.
- H336 May cause drowsiness or dizziness.
- EUH066 Repeated exposure may cause skin dryness or cracking.
Application
1. Remove the cause of the puncture (e.g. nail, screw) if possible, then move until the tire valve is halfway up the height of the rim and let out all of air.2. Shake bottle well. If cold, warm it up.
3. Screw the connector onto the tire valve.
4. Hold container vertically and spray.
Note:
Immediately drive at a max. 30 km/h for 10 – 15 km so that the product can optimally distribute itself on the tire surface. Then correct the tire pressure and immediately go to a workshop to have the tire professionally repaired or replaced. The product is not intended for long-term storage.