Motorbike Engine Flush Shooter

SKU: P003807

Highly effective cleaning fluid. Removes troublesome deposits from inside the engine. Dissolves sludge and lacquer formers. All types of oil-soluble and oil-insoluble residues are brought into suspension and removed during the next oil change. This allows the clean engine and fresh oil to realize their full potential. Learn More

simple to use
highly economical
tested for the use with catalytic converters
long engine service life
does not attack common sealing materials

H304 May be fatal if swallowed and enters airways.

EUH066 Repeated exposure may cause skin dryness or cracking.
EUH208 Contains Benzenesulfonic acid, methyl-, mono-C20-24-branched alkyl derivs., calcium salts. May produce an allergic reaction.
EUH210 Safety data sheet available on request.

Description
Downloads

Flushes out and cleans the oil circuits of motorcycles with 4-stroke gasoline engines. The frequency of use is dependent on the degree of contamination of the oil circuit and on the quality of the oil used. 80 ml (1 can) is sufficient for 0.8 – 2 l of oil.

Application

80 ml (1 can) is sufficient for 0.8 – 2 l of oil. Add to warm motor oil before oil change. Then allow the engine to idle for approx. 10 minutes. With manual transmissions, press the clutch lever several times, holding it for a few seconds each time. Then change the oil and the filter.

Compatible with commercially available motor oils. Suitable for use on motorcycles with wet clutches.

Tech tip

Clutch slip can occur when switching to a different engine oil. The addition of Motorbike Engine Flush (Shooter) before draining the used oil can avoid this issue.

SKU

Informations

Container type

Container contents

Language line

Pallet unit

20576