Liquifast 1502 (Bag-set)

1. Cleaner
The surfaces to be bonded must be dry, free from oil, dust, grease and other dirt residues. The glass surface or ceramic coating is cleaned with Liquiclean or Cleaner and Thinner (part no. 6130) and then with Windshield Cleaner Foam (part no. 1512), as are the bodywork flange or newly painted body components. We recommend also cleaning the remaining adhesive beading that has been trimmed back with Liquiclean or Cleaner and Thinner. Before applying the sealant or bonding the window, the cleaned bonding surface must be completely dry.

2. Priming/activation of pre-coated windows
Active Primer is required for adhesive pre-treating during window bonding. The Active Primer is included in the set as a 10 ml stick. Shake Active Primer well for at least 45 seconds before use. Active Primer can be applied universally in the bonding area thinly and evenly (approx. 0.05 mm wet-film thickness) on the cleaned glass surface or ceramic screen printing, on the clean paint surface of newly painted car-body components, on remaining adhesive beadings that have been trimmed back and pre-coated windows (PUR and RIM coatings). The primed surface must flash off for approx. 15 minutes before the windshield adhesive is applied.
If the remaining adhesive beading was cut back more than 6 hours ago, pre-treatment with Active Primer is mandatory.

Recommendations for use are provided in the brochure supplied.

Set shelf life: 12 months

The best before date and technical data for the individual products are provided in the relevant product information.